Design
The Mechtex brand external drivers are available in Sensor based and sensor less both. Our drivers are compact, easy to use, one stop solution for all your commercial and industrial grade motors.
Standard Data
| Sensor based design |
| Custom voltage and current configurations |
| Trapezoidal speed control using PWM |
| Protective features such as Over current, Over voltage, Under voltage protection, Reverse polarity. |
| IEC 61000-4-2 compliance on request. |
Technical Data
Power Connection
| Pin # | Function | Description |
| 1 | VM | Input Voltage |
| 2 | GND | Supply Ground |
Phase Output
| Pin # | Function | Description |
| 3 | U | Motor Phase U |
| 4 | V | Motor Phase V |
| 5 | W | Motor Phase W |
Control Signal Connection
| Pin # | Function | Description |
| 6 | FLT | Fault Output |
| 7 | PWM | PWM for Speed Control |
| 8 | BRK | Brake Input |
| 9 | FGO | Frequency Generated Output |
| 10 | DIR | Direction control Input |
Hall Sensor Connection
| Pin # | Function | Description |
| 11 | VDD | Hall Sensor Voltage |
| 12 | HU | Hall Sensor 1 |
| 13 | HV | Hall Sensor 2 |
| 14 | HW | Hall Sensor 3 |
| 15 | GND | Ground |
Specification
Electrical Rating
| Supply voltage | 12 – 24 VDC | |
| Output Current (max) | 8A | |
| Output Power (max) | 200W | |
| Efficiency | 78% | |
Inputs & Outputs
| Control Input | PWM, DIR, BRK | |
| Hall sensor Input | HU, HV, HW | |
| Output | FGO & FLT | |
| PWM frequency | 20 – 30 kHz | |
| Voltage output for Hall sensor | Max. 7.8 VDC | |
| (IL ≤ 24 mA) | ||
Environmental Conditions
| Operating Temperature | -20 to 50 °C | |
| Storage Temperature | -40 to 150 °C | |
Connection Diagram
